The fast-easy setback mesh is fixed as a wasting formwork. When pouring the concrete behind the formwork, the scale-like slice of the mesh will embed into the concrete, form a mechanical wedge connected with the adjacent cast. The quality of the seam is controlled strictly, its intensity of adhesive joining and cut will be as good as the well processing scabble seam.

Good mechanical property, side pressure born is small

It bears 60% of the pressure of the general formwork, so the support weight that formwork to the frame will reduce 40%.

Observe the pouring process directly.

Because of the special mesh hole, man's eye can supervise the pouring process it order to reduce the risk of appearance of the pore and the comb.

It is light, so it is convenient for the transportation and the installation.

Its only weight 1/10 of the common standard steel form. The advantages of the light weight are quick installation and easy for transportation.

Optimize technology, add the shearing interface

When pouring, the mortar penetrates into the interface through mesh hole and forms a coarse grain interface with very ideal shearing performance .

It is convenient for the reinforcing steel bar passing and binding the reinforcing steel bar continuously.

The steel bar that its diameter is below 12mm will pass the mesh easily because of porosity of the mesh. For the steel bar that its diameter is above 12mm, can cut the mesh open, after the steel bar passes, pull the mesh back to the pre-position. the fast-easy setback mesh also can be used in binding the steel bar by passing into